As the name suggests, tile saws are used for cutting tiles. In order to meet their specific needs, craftsmen require various different tools and tile saw is one of them. While selecting the saw various factors need to be considered to have the best one so that it brings in high level of professionalism in the work. There are many tile saws manufacturer in the market and among them few are known for their variety as well as quality. Some of the best manufacturers include the following.
On the other hand if you are a handy man or you want to start a small business out of tiling, investing in a professional wet saw may be the best thing for you. If you buy a reliable and powerful tile saw you will be sure that it won’t break too soon. Do not think only for this moment; think ahead and you will gain more.
Below the operating table of the wet tile saw is situated a basin which is filled with water, but care should be taken in how much water is applied to the basin. Too much can result in excessive spillage and splash out, and too little can cause the blade to run dry resulting in damage, so the water level should always be continuously checked, as some does tend to seep out during conventional use.
Select RPM (rotations per minute) of your suitable machine. Different machines are fitted with different kinds of motors that have different rotational power. A wet tile saw that has high rotating power is more effective since it can cut tiles at high speed. In addition, it is sold at a higher cost. Most of the saws vary from 3400 to 5400 rpm. A 3600 RPM saw is mostly suitable for most of the home improvement requirements.
Depending on the kind of tiles you will be dealing with, choose a wet tile saw that will be efficient. It is important for you to understand the horse power rating will greatly affect the torque and blade speed. There are some machines that use 1/3 horsepower but for stronger tiles, ½ hp will do better.
They are known as wet tile saws because they use water to cool the area that is being cut. Because the saw is wearing a groove into the tile there is a huge amount of friction on the blade and the tile. Friction generates heat. If the heat is allowed to build up it can cause the saw to bind up and stop cutting. Wet tile saws use a steady stream of cool water that travels over the blade of the saw to get rid of the heat while you are cutting tiles. It may be messy but it is effective.
The quickest way to cut ceramic tiles is by using a hand tile cutter. The tile is placed on the padded bed against a frame provided for support. Then the saw handle is pressed down firmly and the titanium wheel is rolled along the tile. Now when the handle is firmly pressed again, the tile will break cleanly across the desired line. Tiles cut in this manner may not be cut very accurately. Heavy duty ceramic tile saws are available for cutting extra hard and dense domestic tiles. These saws come equipped with large cutting wheels and specially-equipped handle carriages. References: Wet Tile Saw and Wet Tile Saw Reviews. Zwanzlfrast902.